Our RiskEye^TM Legionella Risk Monitoring Program enables a facility to proactively monitor critical Legionella risk parameters throughout their facility…from the utility room to the OR…24/7.  The parameters measured are all-encompassing and range from temperature to oxidant levels to validating the use of disinfectants.  ProcessEye’s wide variety of sensors interface with RemoteLobes^TM, which are mini-computers with WiFi capability.  Users connect easily via any WiFi device to configure the sensors and access the internet.  There is no need to report back to a central monitoring location, so the sensors can be located anywhere…in the basement or on the rooftop.  No special software, cables, wiring, drivers, etc. are required.  Key parameters are sent to ProcessCentral^TM for storing, trending, alarming, analysis and reporting.

NOTE: This package has 1-yr of the Premium data package default selected, which allows up to 1 datapoint/min for each RemoteLobe^TM.

FEATURES:

• 1x S1 Series 304SS Submersible Level Transmitter (for non-oxidizing biocide)
• 1x S1 Series PTFE Submersible Level Transmitter (for oxidizing biocide)
• 1x 4Ch 4-20mA RemoteLobe^TM w/ 1-Year Premium Data (2 channels for levels sensors, 1 for oxidant reading & 1 spare)
• 2x Temperature Transmitters (either surface-mount, submersible or insertable)
• 2x ProcessConnect^TM cables (connect sensors to RemoteLobe^TM)
• 2x 1Ch 4-20mA RemoteLobe^TM w/ 1-Year Premium Data (one for each temperature sensor)
• 1x AmbiAir^TM RemoteLobe^TM w/ 1-Year Premium Data (for wet bulb, dry bulb, dew point and relative humidity)